I have added some new project summaries to our Consulting Projects list. I have also revised/updated the individual project pages we have, plus the Consulting Projects and Research Projects pages.
The projects I have added are:
Beck Street Bridge over I-15, Salt Lake City, Utah
Hurricane Protection Projects, New Orleans, Louisiana
I-70 Mississippi River Bridge Test Shaft, St. Louis, Missouri
As geotechnical/foundation engineers, we don’t usually get to see much of what happens on a project after the foundations are completed, especially a project like a large bridge that can take years to complete. Technology such as the Internet, webcams, and digital photography have made it easy for us to see how things are progressing on projects, as well as maybe get images of the completed structure. As I have noted before, some projects are using Twitter and Facebook to keep the public informed on closures, delays or overall project progress as part of good public relations. Her are some updates on a few of our recent projects.
The main span is well underway, including the cables. The kcICON Facebook page is here.
Check out the webcam. You can download images if you like. YOu can also do a time-lapse from Day 1 of construction.
Beck Street Bridge:
Part of the I-15 Express Link project in Salt Lake City, UT. The photos below I obtained from the photos page on the project web site. We were involved in the design and construction of the foundations for the Beck Street Bridge only.
The Professor Ralph Peck Legacy Website has been launched by Geoengineer.org:
Geoengineer.org is pleased to announce the launch of "Professor Ralph Peck’s Legacy Website". The Website has been developed to celebrate the life and legacy of one of the Heroes of the geotechnical engineering field and honor a distinguished geotechnical engineer for his dedication and contributions to the society as a teacher, author, and engineer. The Website includes a lot of resources such as biographical data, quotes, photos, powerpoints, and even videos of lectures by Professor Peck. The Shamsher Prakash Foundation has generously sponsored this activity. The website has been developed in collaboration with Mrs. Nancy Peck-Young, Prof. Peck’s daughter and was supervised by an international Advisory Committee of distinguished members of our community that had the luxury of knowing Prof. Peck and consists of Prof. Dobry, Prof. Cording, Prof. Prakash and Dr. Lacasse. The content of the website is divided in three parts: "About his life", "Publications" and "Resources". We hope that this resource will be a source of inspiration for the future generations of geotechnical engineers. We also encourage you to provide us with any additional resources/content and we will be glad to include it in the website’s content.
Such a website is a fitting tribute to such an icon in the geotechnical engineering and construction industry. Make sure and check it out. I have added a link on our sidebar in the Geotechnical Resources section.
With all of us visiting construction projects across the country, occasionally we take a photo that appears to be somewhat “artistic” – maybe the lighting (or lack of), or the aspect. I have assembled a few such photos submitted by DBA engineers in the first installment of the DBA Artistic Construction Photo Contest. Included in this installment are such items as: “Daybreak on Night Shift at JJA” and “Fountain” by S. Dapp, the series “Evolution” by P. Axtell, “GI Rig at Sunset” by T. Siegel, and “Piles in the Mist” by R. Thompson. This first volume has more photos of mine than others, but we’ll work on better balance in future volumes.
Feel free to “vote” for your favorite in the comments. I’ll try to update periodically as we have more “worthy” photos!
Our own Tim Siegel, P.E., D.GE. will be part of the seminar Foundation Design in Karst Terrain in two locations: Johnson City, TN (also known as the Tri-Cities) on June 16th, and in Chattanooga on August 27th. Tim will be instructing on evaluating karst terrain and designing foundations in such terrain. If you are interested in the seminar, information can be found here.
We also want to say Congratulations! to Tim for receiving the specialty certification Diplomate, Geotechnical Engineering (D.GE) from The Academy of Geo-Professionals (AGP). Tim received the designation at the recent Geo-Institute conference Geo-Florida 2010 at West Palm Beach. The excerpt below comes form the AGP web site. Tim is on the second row, far left.
Latest Class of D.GEs Inducted in West Palm Beach, FL
(Back Row, Left to Right: Timothy Siegel, Melvin Esrig, John Wolosick, Thomas Zimmie, Kenneth Stokoe, II, Roberto Sanchez, Marco Boscardin, Allen Cadden, Thomas Witherspoon, Daniel Pradel, Edward Ulrich, Jr., Robert Lukas; Front Row, Left to Right: Peter Nicholson, Derek Cornforth, Don Dotson, Larry Jedele, Delon Hampton, Joram Amir, Anand Puppala, Larry Madrid, Ivan Contreras, Craig Benson, Tuncer Edil)The Academy of Geo-Professional (AGP), held its latest induction ceremony on February 21st in West Palm Beach, Florida at the GeoFlorida 2010. If you have at least 8 years (post-licensure) in the geotechnical field, a P.E., and a Masters or equivalent, then you may qualify to become a Diplomate, Geotechnical Engineering (D.GE). Above is a picture of the Diplomates who were present to receive their certification plaque and pin.
DBA is growing again with the addition of Tim Siegel, P.E. to our team!
Tim has been primarily involved in the analysis and design of geotechnical structures including drilled shafts, cast-in-place piles, micropiles, and earth retention systems. Tim is a Georgia Tech grad (like Dan!) and has worked most of his career since at S&ME and Berkel & Company Contractors, Inc. During his 12 years with S&ME, he advanced from Geotechnical Engineer to Technical Principal and Chief Engineer while developing expertise in construction in karst, seismic design, numerical modeling, and specialty foundations and retaining systems. After leaving S&ME, he was a Senior Geotechnical Engineer with Berkel and was involved in large deep foundation projects all over the United States. While at Berkel, he led the development of the ground improvement technique using Berkel’s ground displacement technology. While at S&ME and then while at Berkel, he taught upper level and graduate level courses while on the faculty of the University of Tennessee. Tim’s resume can be found in the About US section of our site.
We are really glad to have Tim joining us. As you can see by his photo, he has the requisite hair style!
I have updated our calendar for 2010 to include many events in the geotechnical and foundation engineering world that may be of interest, plus known speaking/teaching appearances by Dan. I’ll put in a plug for the events calendars and listings for ADSC, DFI, Geo-Institute, and PDCA. I get most of my information from them.
Some, but not all events,(in addition to my previous post) are:
DFI Helical Foundations & Tiebacks Specialty Seminar – Feb 1
DFI and PDCA – A Joint Conference on Driven Pile – Mar 12
ADSC Drilled Shaft Foundations Seminar – Mar 19
PDCA 14th Annual International Conference and Expo – May 6-8
2nd International Symposium on Cone Penetration Testing – May 9-11
International Bridge Conference 2010 – June 6-10
Earth Retention 2010 – Aug 1-4
DFI 34th Annual Conference on Deep Foundations – Oct 12-15
One area of work we are frequently involved in is data analysis and evaluation of lateral load tests performed by the Statnamic testing device (learn more at the website of Applied Foundation Testing). The mathematics involved in the data reduction can be quite formidable as you interpret the dynamic load-response to an equivalent static load-response. Regardless of the math behind it, watching a test can be pretty cool. It is a whole lot of work for a brief moment of load, but in some situations it can be more economical than a traditional load test.
The video below is from a test on 170-foot long, 32-inch outside diameter steel pipe pile with 0.75"-inch wall thickness. The pile was filled with concrete that included an instrumented rebar cage.
Enjoy!
Yes, you read that right – the last drilled shaft has been installed on the John James Audubon Bridge near New Road, Louisiana. The project has been quite an adventure for us, especially Steve. He spent the most time on the site during shaft excavation, tip grouting, load testing, and even pile driving. Robert got to spend a fair amount of time, too, over the last couple of years. Paul was even lucky enough to make a couple of trips.
The shaft construction was concluded with one last O-cell test on Shaft 3W South. Dan was present for the last load test which went fabulously well.
If you are going to the Geo-Institute congress GeoForida 2010 next February in West Palm Beach, you can hear Steve present the paper he and Dan wrote on the tip grouting and load test program.
The bridge is still under construction, of course, and will be an awesome structure when completed. It was an exciting project for us to be a part of the team. We’ll have a project summary posted in the near future to highlight the details of the foundations. For now, you will have to be satisfied with the slideshows below (in reverse chronological order) from some of our visits this summer and fall.
Load Test at Shaft 3W South – October 2009
Excavation of Shaft 3W South – September 2009
Shaft Grouting and other Construction – June 2009
Shaft Excavation, Pile Driving, and Cofferdams – May 2009
I have added the paper that we wrote and Dan presented at the Deep Foundations Institute 34th Annual Conference on Deep Foundations that was held in Kansas City, MO late last month. The paper highlights how the design-build process was successful in the design and construction of the large diameter drilled shafts supporting the bridge. We discuss the installation methods used, the load test program, and how we evaluated the durability of the shale rock sockets under drilling fluid.
You can check out the progress of the bridge at the project website.
TRB 7th International Bridge Conference – Dec 1-2