Tag Archives: Biloxi Bay Bridge

Biloxi Bay Bridge Test Pile Program – DFI Journal Volume 3, May 2009

 

 

Robert’s paper with Lloyd Held (retired from Eustis Engineering) and Steve Saye of Kiewit Engineering Company on the Biloxi Bay Bridge test pile program has been published in the latest issue of the DFI Journal, published by the Deep Foundations Institute.  A total of 22 indicator piles were installed on the project using the pile driving analyzer to monitor the pile behavior. Five load tests were performed: two axial Statnamic, two lateral Statnamic, and one static axial. The results of the test pile program established driving criteria for production piles that included end of drive blow counts and pile tip elevations with an appropriate allowance for setup.

 

Click on the image below or go to our Publications page.

 

Test Pile Program to Determine Axial Capacity and Pile Setup for the Biloxi Bay Bridge_ThompsonHeldSaye - DFI Journal Vol3-May09

 

The bridge was recently featured on the cover of Civil Engineering Magazine along with a feature article by Pat Cassity, P.E., S.E. of Parsons Transportation Group.  Source: ASCE

0709Cover