Tag Archives: Lateral resitance

NCHRP Report 697 – Design Guidelines for Increasing Lateral Resistance of Bridge Pile Foundations

nchrp_rpt_697_coverWe have added a link to the NCHRP Report No. 697 Design Guidelines for Increasing Lateral Resistance of Bridge Pile Foundations.  This report was published in 2011 and authored by Kyle Rollins, Pd.D., P.E. of Brigham Young University and our own Dan Brown.  Dr. Rollins is a Professor in Geotechnical Engineering specializing in earthquake engineering and soil improvement.

 

In the forward of the report, Andrew Lemer of TRB writes:

NCHRP Report 697: Design Guidelines for Increasing the Lateral Resistance of Highway- Bridge Pile Foundations by Improving Weak Soils presents design guidance for strengthening of soils to resist lateral forces on bridge pile foundations. Lateral loads may be produced by wave action, wind, seismic events, ship impact, or traffic. Strengthening of soil surrounding the upper portions of piles and pile groups—for example by compaction, replacement of native soil with granular material, or mixing of cement with soil—may be more cost-effective than driving additional piles and extending pile caps as ways to increase the bridge foundation’s capacity to resist lateral forces associated with these loads. This report presents computational methods for assessing soil-strengthening options using finite-element analysis of single piles and pile groups and a simplified approach employing commercially available software. The analysis methodology and design guidelines will be helpful to designers responsible for bridge foundations likely to be exposed to significant lateral loads.

Be sure to browse all of the nifty reports and projects in geotechnical and foundation engineering at TRB here.

Also check out our Publications page regularly for new postings.