Get the New FHWA Drilled Shaft Manual
Get the NCHRP Synthesis 418 – Pile Criteria From Test Pile Data
Dan’s Speaking Schedule September 12-13, 2012: Concrete used in Drilled Shaft Construction - ADSC/DFI Drilled Shaft Seminar - Denver, Colorado
October 26, 2012: Factors Affecting the Selection and Use of Drilled Shafts for Transportation Infrastructure Projects - 26th Central Pennsylvania Geotechnical Conference - ASCE/DFI - Hershey, Pennsylvania Other DBA Team Speaking Appearances John Turner (September 12-13, 2012): Analysis & Design of Drilled Shafts - ADSC/DFI Drilled Shaft Seminar - Denver, Colorado
John Turner (September 12-13, 2012): Techniques for Drilled Shaft Construction - ADSC/DFI Drilled Shaft Seminar - Denver, Colorado Conferences, Meetings, Seminars, Workshops
|
By David Graham, on July 22nd, 2011
Constructability Considerations When Designing Drilled Shaft Foundations for Bridges
The May/June 2011 issue of ASCE’s Geo-Strata focuses on bridge geotechnics. Dan contributed an article to this issue summarizing key constructability considerations for bridge drilled shaft designers. Specifically, the article focuses on fresh concrete properties and reinforcement design. Discussion of self consolidating concrete (SCC) and column-shaft connections is also included. The article has been added to our publications page and is available through the link above. Additional details related to bridge drilled shaft constructability can be found in the 2010 FHWA Drilled Shaft Manual here.
By David Graham, on June 14th, 2011
We are pleased to announce that John P. Turner, Ph.D., P.E., has joined our firm as a Senior Principal. Turner is Professor Emeritus, University of Wyoming, where he spent the past 25 years teaching and conducting research in geotechnical engineering. He has undergraduate degrees in both Geology and Civil Engineering and earned his doctorate in Geotechnical Engineering from Cornell University. John will bring his considerable expertise in design and construction of deep foundations to our practice. He is a co-author of the 2010 FHWA manual “Drilled Shafts: Construction Procedures and LRFD Design Methods” and the author of NCHRP Synthesis 360, “Rock-Socketed Shafts for Highway Structure Foundations”, as well as over 100 technical publications on the topics of deep foundations, earth retention, and landslide stabilization. Early in his career John was an engineering geologist with Herbert and Associates and he maintained his involvement in consulting throughout his academic career. Recent projects include design of rock-socketed drilled shafts for bridges at Pitkins Curve in Big Sur and the Antlers Bridge on I-5 in northern California. John is a recipient of the President’s Award and the Distinguished Service Award from the ADSC: International Association of Foundation Drilling. He has maintained active membership in ASCE for over 30 years and is a past chairman of the Committee on Deep Foundations of the Geo-Institute of ASCE.
By Robert Thompson, on March 24th, 2011
Paul gave a presentation recently at the Iowa ASCE Geotechnical Conference where he discussed two project case histories for LRFD design of bridge foundations. The meeting was held March 3, 2011 in Ames, Iowa. In his presentation, Paul gave an overview of the LRFD design procedure as it applies to foundations, reminding them that LRFD is not difficult and that it provides a logical framework for incorporating reliability into foundation design. Paul talked about our experiences using LRFD for foundation design for two bridges over the Mississippi River: the Hastings Bridge in Hasting Minnesota and the new I-70 bridge in St. Louis, Missouri. Both bridges are currently under construction.
A PDF of his presentation can be found at the link through the image below, or on our Presentations page.
Previous Hastings posts
Previous I-70 posts
By Robert Thompson, on May 4th, 2010
Our own Tim Siegel, P.E., D.GE. will be part of the seminar Foundation Design in Karst Terrain in two locations: Johnson City, TN (also known as the Tri-Cities) on June 16th, and in Chattanooga on August 27th. Tim will be instructing on evaluating karst terrain and designing foundations in such terrain. If you are interested in the seminar, information can be found here.
We also want to say Congratulations! to Tim for receiving the specialty certification Diplomate, Geotechnical Engineering (D.GE) from The Academy of Geo-Professionals (AGP). Tim received the designation at the recent Geo-Institute conference Geo-Florida 2010 at West Palm Beach. The excerpt below comes form the AGP web site. Tim is on the second row, far left.
Latest Class of D.GEs Inducted in West Palm Beach, FL
(Back Row, Left to Right: Timothy Siegel, Melvin Esrig, John Wolosick, Thomas Zimmie, Kenneth Stokoe, II, Roberto Sanchez, Marco Boscardin, Allen Cadden, Thomas Witherspoon, Daniel Pradel, Edward Ulrich, Jr., Robert Lukas; Front Row, Left to Right: Peter Nicholson, Derek Cornforth, Don Dotson, Larry Jedele, Delon Hampton, Joram Amir, Anand Puppala, Larry Madrid, Ivan Contreras, Craig Benson, Tuncer Edil)
The Academy of Geo-Professional (AGP), held its latest induction ceremony on February 21st in West Palm Beach, Florida at the GeoFlorida 2010. If you have at least 8 years (post-licensure) in the geotechnical field, a P.E., and a Masters or equivalent, then you may qualify to become a Diplomate, Geotechnical Engineering (D.GE). Above is a picture of the Diplomates who were present to receive their certification plaque and pin.
|
|
|
Comments are closed 
